Once you have a website as well as an web app, rate of operation is important. The faster your website functions and also the speedier your web apps perform, the better for everyone. Considering that a web site is only a collection of data files that talk with one another, the systems that store and work with these data files play a vital role in web site efficiency.

Hard drives, or HDDs, have been, right until recent times, the most trusted products for keeping information. However, in recent years solid–state drives, or SSDs, are already gaining interest. Check out our comparison chart to find out if HDDs or SSDs are more suitable for you.

1. Access Time

Image

Because of a revolutionary new way of disk drive operation, SSD drives allow for much quicker data access speeds. Having an SSD, data access times tend to be lower (as little as 0.1 millisecond).

Image

HDD drives count on spinning disks for data storage reasons. Each time a file is being used, you will need to wait for the right disk to get to the right place for the laser beam to reach the data file in question. This leads to an average access rate of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Due to the very same radical technique allowing for speedier access times, you can also appreciate much better I/O efficiency with SSD drives. They are able to conduct two times as many procedures during a given time compared with an HDD drive.

An SSD can handle at least 6000 IO’s per second.

Image

Hard drives offer slower data access speeds because of the aging file storage and access technique they’re using. In addition, they demonstrate substantially reduced random I/O performance matched against SSD drives.

During Hosting 577’s lab tests, HDD drives dealt with on average 400 IO operations per second.

3. Reliability

Image

SSD drives are lacking any rotating elements, which means there is significantly less machinery within them. And the fewer literally moving components there are, the lower the possibilities of failure will be.

The normal rate of failing of any SSD drive is 0.5%.

Image

With an HDD drive to operate, it must spin a couple metal disks at a minimum of 7200 rpm, having them magnetically stabilized in the air. They have a lots of moving components, motors, magnets as well as other tools loaded in a tiny space. So it’s no surprise that the standard rate of failing of an HDD drive varies between 2% and 5%.

4. Energy Conservation

Image

SSD drives operate nearly soundlessly; they don’t produce excessive warmth; they don’t mandate extra air conditioning options and use up less electricity.

Tests have shown that the typical electricity consumption of an SSD drive is between 2 and 5 watts.

Image

HDD drives are famous for getting loud. They need extra power for cooling down reasons. With a server containing a lot of different HDDs running continually, you will need a great deal of fans to keep them kept cool – this may cause them far less energy–effective than SSD drives.

HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

The speedier the data file access rate is, the sooner the data demands can be adressed. Therefore the CPU do not need to save resources waiting for the SSD to respond back.

The standard I/O wait for SSD drives is just 1%.

Image

Compared with SSDs, HDDs enable reduced data file accessibility rates. The CPU will have to wait around for the HDD to return the inquired data, saving its allocations in the meanwhile.

The standard I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

Almost all of our completely new servers are now using simply SSD drives. All of our lab tests have established that with an SSD, the average service time for any I/O request whilst performing a backup continues to be below 20 ms.

Image

All through the exact same lab tests using the same hosting server, this time installed out utilizing HDDs, overall performance was considerably sluggish. During the hosting server back up process, the typical service time for I/O demands varied between 400 and 500 ms.

7. Backup Rates

Image

A different real–life improvement is the speed at which the back–up is produced. With SSDs, a server data backup today takes under 6 hours by using Hosting 577’s hosting server–enhanced software solutions.

Image

In contrast, with a server with HDD drives, a similar back–up usually takes three or four times as long to finish. An entire back–up of any HDD–equipped web server may take 20 to 24 hours.

With Hosting 577, you may get SSD–equipped hosting solutions at affordable prices. Our web hosting incorporate SSD drives automatically. Go in for an hosting account along with us and witness the way your sites can become better instantly.


  • Service guarantees

  •  
  • All of our Virtual Private Servers come with no installation rates and operate in a steady network delivering 99.9% of uptime. Full root server access warranted.
  • Compare our prices

  •  
  • Examine the resources and features offered by Hosting 577’s Virtual Private Servers. You can start off with a smaller VPS package and move up with just a click as your necessities expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • Contact us 24/7 by email or by employing Hosting 577’s extremely–fast ticketing platform. Our technicians are ready to respond to any of your queries within 1 hour.